For a 4-by-8-foot bed, you’ll need
Two 2-by-12 planks, each 8 feet long
Two 2-by-12 planks, each 4 feet long
12 pieces of rebar, each 2 feet long
A rubber mallet
Newspaper or cardboard
Soil to fill the finished frame
Position your boards.
- On a level section of ground, lay the boards down with their inner corners touching.
Prop up the short sides.
- Use a piece of rebar at the center of each for temporary support. Next, prop up the second long side and adjust the alignment of your frame as necessary.
Add more support.
- Hammer rebar a few inches deep a foot from each corner of the short sides and remove the temporary supports. Add two pieces of rebar 2 feet apart along each long side.
Fill it up.
- Line the bottom of your frame with newspaper or cardboard and wet it thoroughly. Finally, fill your bed with soil to within a few inches of the top.
No comments:
Post a Comment